Product Specifications
|
Specifications |
|
|
Dual WAN |
Configurable for Smartlink backup or load balancing |
|
Standards |
● 802.3, 802.3u
● IPv4 (RFC 791)
● Routing Information Protocol (RIP) v1 (RFC 1058) and v2 (RFC 1723)
|
|
Network protocols |
● Dynamic Host Configuration Protocol (DHCP) server, DHCP client, DHCP relay agent
● Static IP
● Point-to-Point Protocol over Ethernet (PPPoE)
● Point-to-Point Tunneling Protocol (PPTP)
● Transparent bridge
● DNS relay, Dynamic DNS (DynDNS, 3322)
|
|
Routing protocols |
● Static
● RIP v1 and v2
|
|
Network Address Translation (NAT) |
● Port Address Translation (PAT)
● Network Address Port Translation (NAPT), NAT traversal, one-to-one NAT
|
|
Protocol binding |
Protocols can be bound to a specific WAN port for load balancing |
|
Network edge (DMZ) |
DMZ port, DMZ host |
|
Security |
|
|
Firewall |
SPI, denial of service (DoS), ping of death, SYN flood, land attack, IP spoofing, email alert for hacker attack |
|
Access rules |
Up to 50 entries |
|
Port forwarding |
Up to 30 entries |
|
Port triggering |
Up to 30 entries |
|
Blocking |
Java, cookies, ActiveX, HTTP proxy |
|
Content filtering |
Static URL blocking or keyword blocking |
|
Secure management |
HTTPS, username/password, password complexity |
|
VPN |
|
|
IPsec |
50 IPsec site-to-site tunnels for branch office connectivity |
|
QuickVPN |
50 QuickVPN tunnels for remote client access |
|
PPTP |
5 PPTP tunnels for remote access |
|
Encryption |
Data Encryption Standard (DES), Triple Data Encryption Standard (3DES), and Advanced Encryption Standard (AES) encryption; AES-128, AES-192, AES-256 |
|
Authentication |
MD5/SHA1 authentication |
|
IPsec NAT traversal |
Supported for gateway-to-gateway and client-to-gateway tunnels |
|
VPN pass-through |
PPTP, L2TP, IPsec |
|
Advanced VPN |
Dead peer detection (DPD), IKE, split DNS |
|
Quality of Service (QoS) |
|
|
Prioritization types |
Application-based priority on WAN port |
|
Service-based QoS |
Supports rate control or priority |
|
Rate control |
Upstream/downstream bandwidth can be configured per service |
|
Priority |
Each service can be mapped to one of 3 priority levels |
|
Performance |
|
|
NAT throughput |
100 Mbps |
|
IPsec VPN throughput |
59 Mbps |
|
Configuration |
|
|
Web user interface |
Simple browser-based device manager (HTTP/HTTPS) |
|
Management |
|
|
Management protocols |
Web browser, Simple Network Management Protocol (SNMP) v1 and v2c, Bonjour |
|
Event logging |
Syslog, email alerts, VPN tunnel status monitor |
|
Upgradability |
Firmware upgradable through web browser, imported/exported configuration file |
There are no reviews yet.